1. If the thermos cup is sunken, you can use hot water to scald it a little bit. Because of the principle of thermal expansion and contraction, the thermos cup will recover a little. If it is more serious, use glass glue and a suction cup, apply the glass glue to the concave position of the thermos cup, then press the suction cup to the concave position and press it tightly, wait until it is completely dry and then pull it out forcefully. 2. Using the viscosity of the glass glue and the suction of the suction cup, the sunken position of the thermos cup can be pulled out forcefully. If these two methods cannot restore the thermos cup, then the sunken position of the thermos cup cannot be restored. 3. The dent in the thermos cup cannot be repaired from the inside, because the internal structure of the thermos cup is very complicated, repairing from the inside may affect the insulation effect of the thermos cup, so try to repair it from the outside part. 4. If it is used normally, the life of the thermos cup is relatively long. It can be used for about three to five years, but we must pay attention to the protection of the thermos cup, so as to prolong the life of the thermos cup.
Can the paint on the thermos cup be repaired?
1. The paint on the thermos cup can be repaired. 2. Method: You can buy a small bottle of spray paint whose color is the same or close to that of the quilt. After spraying it, blow it with a hair dryer for a while. If you can’t buy it, you can put a sticker on the cup so it can’t be seen. 3. Tips to prevent paint from falling off: first of all, you can buy a better thermos cup cover for the thermos cup, which can protect the outer shell of the thermos cup well. Also, pay attention to the protection of the thermos cup, and try not to bump into it during daily use.kingteambottles, can the paint on the thermos cup be repaired: http：//www.kingteambottles.com
Post time: Mar-15-2023